Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: I wanna Ten Tec Argonaut V and I want it now

  1. #21
    Master Navigator
    Join Date
    Jan 2007
    Posts
    1,329
    I have the Argonaut V but don't think I'll invest in an amp since the difference between 20 and 100 watts wouldn't be all that great on my main mode of CW. On digital, generally Olivia, 10 watts seems to get out just fine with my antenna system.

    If I worked much SSB with this rig, that might be another story.

  2. #22
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,165
    If I had an Argo-V I would be tempted to build an HF all-band amp with a 3CX800A7 or similar tube. 20-25w drive for 800+w PEP output would do it.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  3. #23
    Conch Master
    Join Date
    Mar 2011
    Posts
    6,072
    Quote Originally Posted by W3WN View Post
    Ten-Tec is about to come out with a new linear for the Argonaut level rigs. It will be known as the Model 418, and it will provide 100 W output. I don't know if it will be rated for full output on AM (or RTTY or other full duty cycle modes), I haven't seen the final specs yet.

    It is intended to match the upcoming Ten Tec 539 QRP rig. The 539 will be a 10 W out unit, so you'd have to dial the Argonaut V output back accordingly.

    I believe the 418 will be coming out "soon", and that TT will be taking "pre-orders" on the 539 at Dayton this year. that was as of last October, so of course, schedules are subject to change.

    Prototypes of both units were displayed at the 2011 Ten Tec Hamfest. I got pictures and descriptions of the on K4SWL's web site.

    ...on edit: Correction, the 418 WILL do AM & RTTY. See: http://qrper.com/2011/10/ten-tec-ans...att-amplifier/

    Thank you, that link is water to a thirsty man. I'll start saving my pennies for the TT 418. AM and SSB will be possible. The best part will be that my entire station will fit in my little oak secretary's desk!
    Last edited by KK4AMI; 02-07-2012 at 06:17 PM.
    "Love Trumps Hate."
    "You Facist, Sexual Predator!"
    " I thought a lot about blowing up the White House"
    Uh Huh, What Love?

  4. #24
    "Island Vampire" KB3LAZ's Avatar
    Join Date
    Mar 2008
    Location
    San Vicente, Alicante, Spain
    Posts
    11,536
    Quote Originally Posted by W3WN View Post
    Ten-Tec is about to come out with a new linear for the Argonaut level rigs. It will be known as the Model 418, and it will provide 100 W output. I don't know if it will be rated for full output on AM (or RTTY or other full duty cycle modes), I haven't seen the final specs yet.

    It is intended to match the upcoming Ten Tec 539 QRP rig. The 539 will be a 10 W out unit, so you'd have to dial the Argonaut V output back accordingly.

    I believe the 418 will be coming out "soon", and that TT will be taking "pre-orders" on the 539 at Dayton this year. that was as of last October, so of course, schedules are subject to change.

    Prototypes of both units were displayed at the 2011 Ten Tec Hamfest. I got pictures and descriptions of the on K4SWL's web site.

    ...on edit: Correction, the 418 WILL do AM & RTTY. See: http://qrper.com/2011/10/ten-tec-ans...att-amplifier/
    Wonder what the price range of the 539 will be. Didnt see any info. Now, I may just hold off on buying a 817 in Spain.

    "A night sky full of cries. Hearts filled with lies. The contract: is it worth the price?"

  5. #25
    "Island Vampire" KB3LAZ's Avatar
    Join Date
    Mar 2008
    Location
    San Vicente, Alicante, Spain
    Posts
    11,536
    Quote Originally Posted by KB3LAZ View Post
    Wonder what the price range of the 539 will be. Didnt see any info. Now, I may just hold off on buying a 817 in Spain.
    It appears that the price range is vague but stated to probably be under 1000$ USD. Reading the Q&A, making my own assessment, and comparing the performance VS downfalls I am willing to bet it will be priced between the 817 and the K3X. It would not surprise me to see an 800-900$ price tag on it.

    Likely no 60m, wont matter to me not being in the US. It seems that 160 is on the fence but antenna restrictions keep many off of 160 as it is. No 2m/70cm, again imo not a significant loss.

    The up side from what I have read, roofing filters, DSP, and optional xtal filters.

    I think if this comes in at under 900$ I will give it a whirl.

    As for the amps...Qrp amps IMO are silly. If I wanted to run 100w I would just buy a 100w rig for less than the combo of the rig and the amp. Run qrp..turn down the power. But, that is jmo.

    "A night sky full of cries. Hearts filled with lies. The contract: is it worth the price?"

  6. #26
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,675
    I don't think Ten-Tec wants to set a firm price until they're ready to go into production. Drop Stan Brock (I can't remember his call) an email at sales@tentec.com and see if he can give you a better answer.

    It's nice to see that they're staying in the business. Elecraft and (to a lesser extent) Flex have become the hot topics in a lot of circles, but TT hasn't lost a step.

    Especially now that another former Amateur radio company is going away... you did hear about Drake, right?
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    "The 2020 election wasn't stolen, and speaking the truth is only a crime in countries ruled by tyrants" - Liz Cheney


    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

  7. #27
    Pope Carlo l NQ6U's Avatar
    Join Date
    Jun 2010
    Location
    Maritime Mobile
    Posts
    30,078
    Quote Originally Posted by W3WN View Post
    you did hear about Drake, right?
    You talkin' about this?
    All the world’s a stage, but obviously the play is unrehearsed and everybody is ad-libbing his lines. Maybe that’s why it’s hard to tell if we’re living in a tragedy or a farce.

  8. #28
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,675
    Quote Originally Posted by KJ6BSO View Post
    You talkin' about this?
    Yup.
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    "The 2020 election wasn't stolen, and speaking the truth is only a crime in countries ruled by tyrants" - Liz Cheney


    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

  9. #29
    "Island Vampire" KB3LAZ's Avatar
    Join Date
    Mar 2008
    Location
    San Vicente, Alicante, Spain
    Posts
    11,536
    Didnt even know Drake was still in business in the first place, lol.

    "A night sky full of cries. Hearts filled with lies. The contract: is it worth the price?"

  10. #30
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,675
    Quote Originally Posted by KB3LAZ View Post
    Didnt even know Drake was still in business in the first place, lol.
    The company was, just no longer in the ham market.
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    "The 2020 election wasn't stolen, and speaking the truth is only a crime in countries ruled by tyrants" - Liz Cheney


    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •