Was running this rigg again today and noticed that 10m was not working. Turns out the drive level when set to the [29] band setting
just moves the alc meter slightly when you try to peak it with the drive control. 28 and 24 are dead, but I can peak 21 and other bands with
good alc. I had noticed after the bandswitch rework, the alc was more 'snappier' on the 80 and 160m bands, and 40m showed some improvement, but its not as robust as the others. Wondering if I put the switches back together right....cant remember if these bands worked before I began the task.