Has anyone here successfully used a SDR to receive Trunked Tracking messages?

I started out here: https://sites.google.com/site/policescannerhowto/. I also browsed the links provided for support information.

I have a working install of SDR# with a Trunk Tracking plugin but, when tuned to control frequency and, I am seeing digital signals but, the receive is not tracking and decoding them. I have two dongles, one for the "Signal" receiver and one for the "Control" receiver.

The article was written in 2013, in the process of trying to figure why my install wasn't decoding, I ran across this: If you’re a glutton for punishment, continue with this doc:


Back in my working days, I was the fellow that the folks called to untie knots that nobody else could not untie; I was not deterred by the warning.

But, Dayum, he was right.

I am soaking up information from http://forums.radioreference.com/sof...n-updated.html as you can see, this thread was started in 2013. I have spent multiple hours standing here with "Virtual Cables", Digital Speech Decoder, Trunk-Tracker; something small is missing, I have re-read the pages and retraced my steps.

It's been on hold for the last week, I guess I'm ready for more Sado-Masochism.

"Help!"

.