Page 4 of 9 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 84

Thread: I need a good Ten-Tec guy.

  1. #31
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,161
    An Omni V in perfect working order - no upgrade chip, no power supply and with all filters - is worth $500-550.

    K3JLS has the solution to N4YG's leaving the market. I just reached out to Joe ('YG) and inquired about buying a dozen or so of his PCBs and programmed PICs. Steve and Dave, you may wish to do same for your rigs...I'll build them for you when I ramp up "production" on the stuff I'm planning to buy.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  2. #32
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,161
    Quote Originally Posted by W3WN View Post
    N3ZI sells DDS kits, I've heard good things about them. Might be worth checking into?
    The big gotcha with 'ZI's offerings is range. Make the thing in two versions...wideband (0.1-32MHZ) and PTO/VFO replacement (5.0-5.5 or 5.0-6.0MHz)...you'll have a good solution for either application.

    Don't scrimp on the rotary encoder for your DDS project. Use a Grayhill 63F256 or similar ball-bearing model. This one is rated at 300 million revolutions and turns smooth as silk.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  3. #33
    Forum Addict KA9MOT's Avatar
    Join Date
    Apr 2010
    Location
    Macomb, IL
    Posts
    2,819
    Quote Originally Posted by N8YX View Post
    An Omni V in perfect working order - no upgrade chip, no power supply and with all filters - is worth $500-550.

    K3JLS has the solution to N4YG's leaving the market. I just reached out to Joe ('YG) and inquired about buying a dozen or so of his PCBs and programmed PICs. Steve and Dave, you may wish to do same for your rigs...I'll build them for you when I ramp up "production" on the stuff I'm planning to buy.

    Yes! I sold Mike's Omni V for $500 plus shipping. The new owner is very happy with it. :)

    I did contact Joe (and sent him a link to this thread). He had some good advise and recommended I speak with David N4AX. I'll be sending him an email in a little while.
    Thanks for the K3JLS recommendation.

    Joe also said that after talking with N4AX that if I still wanted to buy the parts, he'd sell me a kit. I'm not 100% sure I am good enough to assemble one of these, so I may take you up on your generous offer Fred. Of course, I would be willing t pay you for your assistance.
    Last edited by KA9MOT; 10-05-2015 at 05:33 AM. Reason: I can't remember names. Screwed up.


    "One man with courage makes a majority." ~ Andrew Jackson




    Steve KA9MOT
    Macomb, IL

  4. #34
    Forum Addict KA9MOT's Avatar
    Join Date
    Apr 2010
    Location
    Macomb, IL
    Posts
    2,819
    Quote Originally Posted by W2IBC View Post
    who cares what ya call it, $125 and it works is a win.
    Definitely a win! We have a local ham here who doesn't have allot. I plan to "loan" it to him as incentive to upgrade to General.


    "One man with courage makes a majority." ~ Andrew Jackson




    Steve KA9MOT
    Macomb, IL

  5. #35
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,161
    Quote Originally Posted by KA9MOT View Post
    Yes! I sold Mike's Omni V for $500 plus shipping. The new owner is very happy with it. :)
    I bought an Omni V from one of Ron's cronies for the same price several years ago. It features something that the Omni VI, Paragon I and II don't: An all mode squelch. The others only operate when in FM.

    DUMB, especially on a rig which features a true RF Gain control. You can mimic a squelch on things which use an IF Gain (like a Kenwood or Drake) just by turning the control until it begins to deflect the S meter and quieting occurs.

    Regardless, I'm not looking to get rid of any of my Sevierville-produced stuff. When I redo my shack this fall I'm going to put all four T-T transceivers in the HF operating spots.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  6. #36
    Whacker Knot WØTKX's Avatar
    Join Date
    Aug 2008
    Location
    Lakewood, CO
    Posts
    26,758
    To do all of my collection, I'd need five DDS replacements. Three rigs and two outboard VFOs.
    However, only one is really bad, on the Omni D series B. T:chin:

    OTH, they just sit, as I use my Flex all the time.
    BTW, the Flex has all "all mode squelch". ;)
    "Where would we be without the agitators of the world to attach the electrodes
    of knowledge to the nipples of ignorance?" ~ Professor "Dick" Soloman



  7. #37
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,634
    Quote Originally Posted by KA9MOT View Post
    Yes, I mixed up the callsign! DOH!

    I'll still keep finding a way to get this old rig on the air.

    On a side note, I scored a Kenwood TS-520 at Peoria's Superfest for $125. The rig works so well, and looks almost new.......

    Does a TS-520 count as a boat anchor?
    I know where you can get a TS-520 with spare finals, drivers, and the yet to be installed replacement resistors for the final tank circuit.
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    "The 2020 election wasn't stolen, and speaking the truth is only a crime in countries ruled by tyrants" - Liz Cheney


    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

  8. #38
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,161
    I have 12 (count 'em) 'YG DDS VFO boards with PIC and DDS chips attached inbound. 8 for my Drake conversion projects (4ea TR7 and R7) and 4 for the SB104 "hacking" project which I've been detailing elsewhere on the site.

    Dave, this might be a good way to go if you want to update your stuff: $35 per board with both components attached; you source the rest and finish the units.

    Assuming that I have most of the other needed parts in Ye Olde Junque Box, the money I'll save by assembling mine will make a significant dent towards recouping the cost of my PACE soldering equipment.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  9. #39
    Forum Addict KA9MOT's Avatar
    Join Date
    Apr 2010
    Location
    Macomb, IL
    Posts
    2,819
    Damn.... I've got to do a better job of keeping up!

    Quote Originally Posted by W3WN View Post
    I know where you can get a TS-520 with spare finals, drivers, and the yet to be installed replacement resistors for the final tank circuit.
    Hmmm....... How much mullah?


    "One man with courage makes a majority." ~ Andrew Jackson




    Steve KA9MOT
    Macomb, IL

  10. #40
    Forum Addict KA9MOT's Avatar
    Join Date
    Apr 2010
    Location
    Macomb, IL
    Posts
    2,819
    Quote Originally Posted by N8YX View Post
    I have 12 (count 'em) 'YG DDS VFO boards with PIC and DDS chips attached inbound. 8 for my Drake conversion projects (4ea TR7 and R7) and 4 for the SB104 "hacking" project which I've been detailing elsewhere on the site.

    Dave, this might be a good way to go if you want to update your stuff: $35 per board with both components attached; you source the rest and finish the units.

    Assuming that I have most of the other needed parts in Ye Olde Junque Box, the money I'll save by assembling mine will make a significant dent towards recouping the cost of my PACE soldering equipment.
    I think Joe must have taken pity on me because of my sob story. He sold me a complete DDS Kit. The guy is a credit to this hobby.
    I can't wait to put Mike's radio on the air.


    "One man with courage makes a majority." ~ Andrew Jackson




    Steve KA9MOT
    Macomb, IL

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •