There is a goodly amount of "sane" (note qualifier) activity on the SSB spots. When the band rolls up for the night I turn the BC2000's preamp on and see what there is to see in the way of weak signals from CH36-40.Originally Posted by N4BBQ
Back in the waning days of the boom (say, from 1980 onwards) many of the regulars didn't bother to turn their radios on until well after sunset local time. After the omnipresent summer Es racket died off and things quieted down, we routinely worked stations which were 60-100mi away. If you've ever played around with weak-signal 2 and 6M SSB, the experience was much like that. A good receiver and a good directional antenna were a must. Many people (myself included) slaved high(er) performance communications receivers to our Class D transceivers and used them to dig out weak signals.
Mind you, this was back in the days where the average 11M operator was running one of three classes of equipment: An older crystal-controlled transceiver such as a Browning Mark III or Tram D201 in conjunction with an external VFO, an early generation synthesized transceiver (23 or 40CH) or some model of ham transceiver. Of the latter, the most popular set by far was the FT-101 series and the Drake TR7 brought up a close second...though other amateur equipment was heard 'round the band at times.
The key thing to remember is that unless Dr. Diddlesticks got his fat fingers into a "vintage" radio, almost none of them would create splatter to the point which required one to lean heavily on the filtering provided by a commercial-grade receiver in order to hear those weak signals. The current crop of garbage "export" radios flooding the U.S. have noisy synthesizers (which results in an increase in transmitted wide-band noise) and many don't incorporate an optimally designed PA. Thus, good luck working those distant neighbors late at night if the Power Rangers (and Galaxys too!) set up shop in your vicinity.
Reply With Quote