Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 48

Thread: Power supply...

  1. #11
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,165
    There's currently a -20A floating around the 'Net for $60 and shipping. Assuming this thing load tests OK (no ripple, etc) make me an offer I won't refuse.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  2. #12
    La Rata Del Desierto K7SGJ's Avatar
    Join Date
    Feb 2010
    Location
    The Desert
    Posts
    16,791
    Quote Originally Posted by K9CCH View Post
    Price is going to be key... I'm pretty much on a non-existent budget.
    I hope it works out for you. One other thing to consider; some switching power supplies can generate a fair amount of noise do to the nature of the design. I think most of the ones designed to power radio equipment is pretty well filtered and suppressed. Also, at VHF/UHF, and especially FM, it may not be as much of a consideration as it would be at HF frequencies, and other modes. I have no knowledge about the one you were looking at, but maybe someone else has some direct knowledge they can pass along. You might even see if there are any equipment reviews, you might try to Google it or try Eham. The Astron is not a switching type supply, and that problem is non-existent. Just something to be aware of, and it might even be a non-issue. Just a heads up for you.
    A clear conscience is usually a sign of a bad memory

    RIP ALBI-W3MIV RIP RUSS-W5RB RIP BOB-VK3ZL





  3. #13
    Master Navigator K9CCH's Avatar
    Join Date
    Jul 2013
    Location
    The Armpit Of, TX.
    Posts
    1,121
    I know I have a few power supplies from some old laptops, and perhaps a speaker system. Is it as easy as cutting the connector off the end and connecting + and - and plugging it into the wall? Considering its the proper output etc...


  4. #14
    La Rata Del Desierto K7SGJ's Avatar
    Join Date
    Feb 2010
    Location
    The Desert
    Posts
    16,791
    Quote Originally Posted by K9CCH View Post
    I know I have a few power supplies from some old laptops, and perhaps a speaker system. Is it as easy as cutting the connector off the end and connecting + and - and plugging it into the wall? Considering its the proper output etc...
    Again, as someone else noted, you'll need at least 10+ amps@13.6 to properly run that rig. Most laptop supplies are 4 amps or less, and any more are around 19 volts. Some of the older ones were 15 or 16 volts at 2-3 amps, but again, they will be lacking for your application. I'd beat Fred up for a good deal on the Astron. It is heavier to ship than that other one you were looking at, but well worth it. And, if he checks it out and says it's good to go, you can bet the rent it is.
    Last edited by K7SGJ; 07-23-2013 at 10:09 PM.
    A clear conscience is usually a sign of a bad memory

    RIP ALBI-W3MIV RIP RUSS-W5RB RIP BOB-VK3ZL





  5. #15
    Forum Addict
    Join Date
    Oct 2011
    Location
    Hillsborough, NC
    Posts
    2,873
    I bought my RS20 used - it may have been the 2nd ham-related purchase I ever made.

    12 years later, it's still chugging along...although on bench duty now. I'd snap up the RS35 in a heartbeat if I were in your situation.
    Jim
    The machine does not isolate us from the great problems of nature but plunges us more deeply into them. - Antoine de Saint-Exupéry



  6. #16
    Conch Master W7XF's Avatar
    Join Date
    Jul 2007
    Location
    DM42kj
    Posts
    6,863
    Chris....seriously, don't consider anything less than 12V 20A output. If your radio taxes your power supply to its limit, you will have a lot of AC hum on your signal. Whether you get a switching supply, or a transformer supply is totally up to you; however, a transformer-based supply may be rather costly to ship. I'd go over to Fry's Electronics..they have a reasonable selection, and they're well priced.
    Encrypt everything. Even if you have nothing to hide. It increases the noise floor.

  7. #17
    Orca Whisperer
    Join Date
    Oct 2009
    Location
    Buffalo, NY
    Posts
    22,593
    Quote Originally Posted by K9CCH View Post
    I know I have a few power supplies from some old laptops, and perhaps a speaker system. Is it as easy as cutting the connector off the end and connecting + and - and plugging it into the wall? Considering its the proper output etc...
    I should have been a bit clearer when I said a computer power supply. I mean the internal power supplies for desktop machines. The laptop bricks are noisy as fuck (I've tried them to run a small HF rig) and have some funky power protection circuits (To prevent overcharging and the like I presume) which cut out if you're not exactly matched to what they are expecting.

    You can get the case power supplies for nearly nothing pretty often. Look on Craigslist and garbage piles for people tossing computers, and gut it. You can find the instructions for doing the required mods here: http://web2.murraystate.edu/andy.bat...owersupply.htm

    It's a nice project for a new ham, to get down and dirty with a soldering iron and components that wont burn up easy.

    As for the Astron Fred is offering up for sale: Jump on it. Sell blood and sperm if needed (EW! Not mixed together). I have a 30 year old Astron still kicking, and it's what I'm running my station on at the moment.
    Big Giant Meteor 2020 - We need to make Earth Great Again

    http://www.coreyreichle.com

  8. #18
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,663
    Quote Originally Posted by K7SGJ View Post
    I'd take Fred up on the Astron offer. I have several, and they are pretty much bomb proof. But if one should ever go TU on you, they are a cinch to fix.
    Fred is a good guy, he'll make you a fair offer.

    FWIW, a couple of years ago, I bought a working RS-35A at a hamfest for $35; it powered my TS-480SAT for a couple of years before that got traded for the Omni VI+. At present, the Astron is the backup to the Omni & Corsair power supplies...

    I should be getting my 10 meter rig back fairly soon, and I should have a spare RS-7 once that happens. I suspect that won't be enough power for you, though.
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    "The 2020 election wasn't stolen, and speaking the truth is only a crime in countries ruled by tyrants" - Liz Cheney


    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

  9. #19
    "Island Vampire" KB3LAZ's Avatar
    Join Date
    Mar 2008
    Location
    San Vicente, Alicante, Spain
    Posts
    11,536
    Quote Originally Posted by KG4NEL View Post
    I bought my RS20 used - it may have been the 2nd ham-related purchase I ever made.

    12 years later, it's still chugging along...although on bench duty now. I'd snap up the RS35 in a heartbeat if I were in your situation.
    Yep, they are worth the investment. A power supply was one of the first things I bought too. I have had my RS-70A for 9 years now and it was used when I got it. Hell, my grandfather has been using his RS-35A for likely my entire lifespan. Lol.

    "A night sky full of cries. Hearts filled with lies. The contract: is it worth the price?"

  10. #20
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,663
    Oh, I should add that I do not have a high opinion of those RS "Micronata" power supplies.

    A club member donated one to run the NP2SH beacon. It malfucntioned and sent a spike into the beacon transmitter. Both were repaired, and then it happend a second time.

    The beacon is now running on an Astron RS-7B that I got my hands on. (That's not a typo; the factory label said RS-7B, not RS-7A. No idea what the difference is, but outside of the label, it looks and works exactly like my spare RS-7A)
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    "The 2020 election wasn't stolen, and speaking the truth is only a crime in countries ruled by tyrants" - Liz Cheney


    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •