that is what I did at the old house, but I made a multiband dipole. I needed to limit the copper running through the air here so that is why the OCF.

At the old house, I had a 40 ft tower, an arm coming off at the top of the tower, and the dipole on the end of the arm. I cam down to ground level to the AH-4. I split the window/ladder line and one side to the ceramic insulator and the other to the wing nut side...

The only difference will be that I have major (old growth) trees where I will launch paracord into the trees. On the end of the paracord, tie off to a dogbone.

One issue I might have is stretching the copper over the years. Copper-weld wont stretch, but the #14 bare that I plan to use might. As I type this, I just might change out the soft copper for the copper-weld.