A recent QST had an article titled "6+2=1" detailing a 6m/2m antenna.
Driven element is made from a short section of 450 ohm ladder line, common coax feed.
I have a Ten Tec 6n2, so it was a perfect project.
I built it, it works as advertised, just letting members know.
AC2Q
Glad to hear it worked for you. I'd didn't think it had a ghost of a chance to work.
A clear conscience is usually a sign of a bad memory
RIP ALBI-W3MIV RIP RUSS-W5RB RIP BOB-VK3ZL
You have to approach the construction with the right Spirit.Originally Posted by K7SGJ
And you can't be even a Shade off in your measurements.
Using Horizontal Poltergeistazion
If you screw up, you'll be Boned for sure.
You need not be so cryptic, and be sure to keep the dust off of it, otherwise you'll be coffin all damned day.
A clear conscience is usually a sign of a bad memory
RIP ALBI-W3MIV RIP RUSS-W5RB RIP BOB-VK3ZL
Yeah, you don't want to get the Joint dusty. It wouldn't be Humerus.
No it wouldn't. In fact that would really spook me.
A clear conscience is usually a sign of a bad memory
RIP ALBI-W3MIV RIP RUSS-W5RB RIP BOB-VK3ZL
I got nuthin..............
Posting Permissions
Reply With Quote