My old setup was Prolll > amp > Tuner > Dummy Load/Antenna. I know this is the correct configuration but..My old tuner had an SO239 for a dummy load and a position on the front for dummy load selection. Looking at modern tuners, particularly the Palstars, they do not have a dummy load switch position and a bypass, only a bypass. I assume putting the dummy load in line through the bypass would be fine rather than using a coax switch and putting the dummy load in line with the Amp directly via switch. Would this be fine or am I having a dumb moment?
I need to hit the books and get back on the air...Working only the forums has left a soft spot in my head.