And now, the problematic one. The left-hand Paragon is awaiting a set of 500 and 250hz filters and must be removed from the lineup for their installation. As for the other...I'm pretty sure there are a number of PIN diodes on the TX and RX bandpass filters that are asleep at the wheel, and possibly one or two on the 1st and 2nd Mixer boards. I have no transmit or receive from 1.7-2.5MHz; the 6KHz 1st Mixer filter (and more than likely its pass-through equivalent on the 2nd Mixer board) appears to be 20dB down in throughput and compared to the other filters.
Both of the transceivers are going to dance with the signal generator and a scope before going back inline.
The Herc-II shown in the picture is currently the world's most expensive speaker: I'm not going to run 220v into the shack for its power supply, and those don't like 110v.
RHShack-0623.jpg