Results 1 to 5 of 5

Thread: Got My Case! Next!

  1. #1
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,316

    Got My Case! Next!

    Well, the slowly-but-surely homebrew transmatch project just took another great step forward...

    Found the "RF Tight Case" for what had been once a Drake MN-2000 on eBay. Won the auction, it should be here next week.

    [There had been an MN-2000 front panel available as well, but I didn't try to get it until the other auction was over, and it's gone. Oh well... wasn't critical though...]

    This case should have plenty of room inside for both of my caps and the roller inductor, plus it already has a lot of "pre-drilled" holes for the SO-239's and such. I'll need to pick up some feet and some (dare I say it?) knobs, but that's no biggie.

    Now... the next challenge, what to do with the front panel hole for the meter? Ideally, it would be nice to put another SWR meter there, and I'm considering a few options. But despite the cosmetic issue, that won't be a "show stopper" until I figure it out.

    Meanwhile, if anyone has any pieces from an MN-2000 sitting around collecting dust and rust... does it take the same outer case as the C Line?... let me know!
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    Just remember: Abraham Lincoln didn't die in vain. He died in Washington, DC

    Cutch 2K!!

    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

    Quando Omni Flunkus Moritati


  2. #2
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,070
    Go to the Zerobeat "Drake List" and put out a request for one. You should get a number of responses.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  3. #3
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,316
    Case arrived this afternoon.

    Shipper has more faith in the USPS than I do. He must have found a cardboard box with EXACTLY the right dimensions, that aluminum case was in it tight, but good. Had to slice the box apart to get it out... no other packing. Not wise, but he got away with it.

    So, next step is to figure out the layout of the main components, and then see where (if) I have to drill new holes. That and find the right sheet metal screws... none came with the case, but then, none were advertised either.

    If my warped and fading memory is correct, it looks like the MN-2000 was the same basic shape as the C Line, so I may just hunt down an outside case to put this in, when I'm done. But no rush on that.

    Now comes the fun parts. Including figuring out how I'm going to rig up antenna switching (might as well take advantage of the existing SO-239 holes, right?) and bypass. I have a little Heath HD-1234 4 position mountable antenna switch, so I may just dismantle that and use the pieces (got it a few years ago at Dayton for a whopping $1), we shall see.

    Also found this guy on eBay: http://auctionworks.com/StoreFrontPr...spx?sfid=86409

    He claims to have a lot of NOS Drake parts, including the (dare I say it? dare! dare!) matching knobs for the MN-2000. I'll probably get those from him at some point, trying to keep things authentic.

    The one decision I'm putting off for now is the issue of the SWR bridge. I'd love to put a dual needle in there, and only have a switch for power level, but that's not something you can easily find instructions on. There are a couple of places that are selling digital SWR meter kits, so I may end up going with one of those. It can wait.

    And I will have pictures once I get the project rolling. Might be a nice newsletter article, eh?
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    Just remember: Abraham Lincoln didn't die in vain. He died in Washington, DC

    Cutch 2K!!

    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

    Quando Omni Flunkus Moritati


  4. #4
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,316
    Quote Originally Posted by N8YX View Post
    Go to the Zerobeat "Drake List" and put out a request for one. You should get a number of responses.
    I will do that as well, should have mentioned it. Who knows what I might end up with?
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    Just remember: Abraham Lincoln didn't die in vain. He died in Washington, DC

    Cutch 2K!!

    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

    Quando Omni Flunkus Moritati


  5. #5
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,070
    Also try "TR7dude" on eBay. He has a number of NOS parts.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •