Recapped the Heath HP-10 this afternoon.

[W1GUH]

PS and one cable are done and checked out. Initial firing-up of the Cheyenne says it's "semi-alive." Lights up, there B+, the final draws current, but there's no grid drive. Ah, well, tha'll be fun to track down another day.

For now, the PS seems to be very happy and is good under load.

AND -- no magic smoke has escaped!

[w2amr]

PS and one cable are done and checked out. Initial firing-up of the Cheyenne says it's "semi-alive." Lights up, there B+, the final draws current, but there's no grid drive. Ah, well, tha'll be fun to track down another day.

For now, the PS seems to be very happy and is good under load.

AND -- no magic smoke has escaped!

No smoke is good smoke.

[W1GUH]

No smoke is good smoke.

At least inn this situation.

Looking forward to checking this out; could just be that the +LV pins on the connector are corroded -- had a problem with the +12v that way. If I hadn't been so tired I woulda looked to see if the LV was getting into the radio but it was time to quit.