Hi Fellow Hams,
I'm new to The island, actually just heard about it on a thread in 1 of the other Ham sites.
Glad to be here, Well anyway got a uniden 2020 last week vfo did work now it doesnt.
Bandswitch and associated linkage seems to be in order, display shows proper Freq for bandswitch setting.
Any Ideas? As i said vfo was working then just stopped.
BTW i get 150 w out to a dummy load but i have no idea what freq its on.
Thanks for reading and any info.
Michael
nm8d
I'm not really familiar with that rig but it has a belt-driven mechanical frequency read out, right? I'd suggest pulling the cover off and checking the belt first off.
BTW, Welcome to the Island! Barkeep, give this ham the drink of his choice and put it on my tab.
Last edited by NQ6U; 07-16-2011 at 12:29 PM.
All the world’s a stage, but obviously the play is unrehearsed and everybody is ad-libbing his lines. Maybe that’s why it’s hard to tell if we’re living in a tragedy or a farce.
Internal VFO or external?
The 2020 was unique in that it employs a multi-loop synthesizer and tunes in 100KHz segments, each range being switched.
Start with the simple things: First, a service manual. Second: Are all the loops in the synthesizer locked?
"Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."
I have unlimited access to mods.dk right now so I downloaded a PDF the manual and some alignment info for the 2020. If you'd like them, PM me with your e-mail address and I'll send them along along to you.
All the world’s a stage, but obviously the play is unrehearsed and everybody is ad-libbing his lines. Maybe that’s why it’s hard to tell if we’re living in a tragedy or a farce.
Hi,
A multi loop synthesizer?? what the heck is that , lol, im a new electronics Ham
Give me Phase lock loop , and microcontrollers,
This will be my first boatanchor
I'm new here, will have to learn to PM
Heres my email.
Yea sure that would be a great help!!
Thanks in advance
Michael
nm8d at arrl dot net
Last edited by nm8d; 07-17-2011 at 12:39 AM.
Manuals should be in your email IN box.
PMs are easy: First, find a post of the person you want to send a PM to and click on his user ID in the upper left of the post. A menu will pop up; select the the "Private Message" option. The rest will be self-explanatory
All the world’s a stage, but obviously the play is unrehearsed and everybody is ad-libbing his lines. Maybe that’s why it’s hard to tell if we’re living in a tragedy or a farce.
I don't think I have ever seen one of those before. Pretty slick looking, but hardly a boat anchor. Hope you get it working. And welcome to the Island.Originally Posted by nm8d
Got a chance to look at the schematics of the unit (thanks Carl!).
Does the "INT" LED illuminate when the VFO selector is set to "internal"?
If so, do you have a way to look at the VFO's output (pin 5 of J701?) Any signal?
Also check Pin 3 of the same connector - you should see 6VDC there when the VFO selector is set to "internal". Absence of voltage means the VFO won't operate.
"Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."
Posting Permissions
Reply With Quote