Other than 2222's 3904 3906 - 1n34/1n914's, 555's

[N8YX]

If you do anything with RF, standard range inductors and chokes are a must.

Digital?

Be well-stocked in the 74xx, 74LSxx and 40xx lines.

I have a bunch (and I do mean a BUNCH) of caps, precision half-watt resistors and the like; I'll never use all of the particular values I have on-hand. A goodly-sized assortment is yours for the cost of postage.

[kd8dey]

If you do anything with RF, standard range inductors and chokes are a must.

Digital?

Be well-stocked in the 74xx, 74LSxx and 40xx lines.

I have a bunch (and I do mean a BUNCH) of caps, precision half-watt resistors and the like; I'll never use all of the particular values I have on-hand. A goodly-sized assortment is yours for the cost of postage.

Careful, when I get a little better up I might take you up on that offer, Steve (Mot) too if I am not too late by then...

Got Wifoid 1.0 a little miffed at me this morning. Started a little "project" spread across part of the the living room floor last night that I need to finish up.

I have one of those large Plano fishing boxes I grabbed a several months ago when I outgrew the smaller tackle box ITT issued when I first started.

I was up past 2 am "Customizing" one of the trays so some of my stuff fit better. Who knew that nibbling out a few compartment dividers using my small wire stripper and a pair of dykes could be so time consuming and messy.

Anyhoo I have 2 of those 1/2w resistor assortment packs, 1 came with the kit, the other I got from the school chair as reimbursement for some antennas from radio shack I needed on a couple of those radios for the blind I was fixing in the lab.

I also have a bag of 1/4w assorted from "the shack" and a 1lb pipe tobacco bag of 1-2w unsorted resistors that "Skool" was throwing out that I grabbed :)

In the course of 5 quarters, all those little resistors that never seem to get put back in their plastic baggies congregate in the oddest places, You know, The spots you never check so you end up digging another one out of the baggie?

So I am working on sorting them out since they are the ones most commonly used in lab class, And giving each one a baggie of it's own instead of 5 different values in a bag like they were originally packaged in a little box.

The school kit didn't have a whole lot of parts except for the resistors and a few project kits for soldering practice.
They only had a few of the different capacitors, A few IC's and inductors (Skimpy bastiges). So Thats one thing I need to work on along with Semis :)

Went through the hand tools they had along with what I already had and sorted 1 each of the best example into the box along with my hot glue gun & desoldering iron.

Turning into a real project of it's own, But I'll be somewhat organized If I get the chance to return to school.

[KA9MOT]

Careful, when I get a little better up I might take you up on that offer, Steve (Mot) too if I am not too late by then...

All my stuff is gone, except for maybe a small box of stuff that came out of the drawers and TONS of Fuses and Boxes of Lamps. Give me a little time to heal, and I'll see if I can put something together for you.