Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Thanks for the invintation!

  1. #1
    Newbie
    Join Date
    Apr 2010
    Location
    East Tennessee
    Posts
    18

    Thanks for the invintation!

    I was invited by Bob NA4BH to come here. Thanks Bob! I am a misfit ham. I will not or ever will be a member of the ARRL. I disagree too much what they have to say. I quit being a member of any ham club. Ham Radio is ONLY a hobby. I want to stay away from the politics. Speaking about politics, I do like to talk about it on the air.

    Besides Ham Radio, which actually is my 2nd hobby. I love trains. I wold rather go to a model railroad convention than a hamfest! However, in my modeling, there is a house that has a tower with a beam and a dipole on the layout! My favorite railroad is the Rock Island Line. I have more invested in my model trains than I do in ham radio station!

    I do have HF-UHF abilities. I love to talk about trains and our state of affairs. Those who try to control me, really gets under my skin.

    Thanks for listening to my rant. 73 and have a good day,
    Andy KF4JQD

  2. #2
    Master Navigator W5IEI's Avatar
    Join Date
    Mar 2007
    Posts
    1,070

    Re: Thanks for the invintation!

    Good to see you Andy,Welcome.
    Mike
    Ummmm, no I'm not peeing in my gas tank :)

  3. #3
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,087

    Re: Thanks for the invintation!

    Welcome, Andy.

    I used to be into model railroading years ago...right before I discovered SWLing, amateur/CB radio and all the other neat RF-based aspects of the electronics hobby. When I took a look around at what people are doing these days with cab control, CTC and the like I was stunned...it's a far cry from the time of simple block switching!
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  4. #4
    Orca Whisperer PA5COR's Avatar
    Join Date
    Feb 2009
    Location
    The Netherlands
    Posts
    12,190

    Re: Thanks for the invintation!

    Welcome Andy!

    We have a large section of P.J here, no tight *ssed moderators that have a God complex too

    Just have fun here, we do, enjoy the Island and the drinks
    "If the Republicans will stop telling lies about the Democrats, we will stop
    telling the truth about them." - Adlai Stevenson (1900-1965)
    “I’m not liberal/conservative, I’m anti-idiotarian.”
    At some point in the last 20 years, the left moved to the center, and the right moved into a mental institution

  5. #5
    Island Godfather NA4BH's Avatar
    Join Date
    Mar 2010
    Posts
    10,933

    Re: Thanks for the invintation!

    Welcome Andy. Glad you caught a boat to the Island before the other place sinks. It is a different World here, laid back easy going and we have one hell of a bartender. It's about time for happy hour, which lasts 24 hours a day. Not available in SECTOR R.
    "Friendships come in strange packages
    The best ones are opened with a smile"

    NA4BH '15

  6. #6
    'Grumpy old bastid' kb2vxa's Avatar
    Join Date
    Aug 2007
    Location
    Lakewood, NJ
    Posts
    13,081

    Re: Thanks for the invintation!

    Welcome fatass. (;->) You'll find a few misfit railfans here too and you just met one of them. Speaking of the CRI&P, who put the toll gate in New Orleans when the tracks never went there and what engineer would stop and pay for pig iron even if they did?
    "The universe is under no obligation to make sense to you."
    Neil deGrasse Tyson

    73 de Warren KB2VXA
    Station powered by atomic energy, operator powered by natural gas.

  7. #7
    Newbie
    Join Date
    Apr 2010
    Location
    East Tennessee
    Posts
    18

    Re: Thanks for the invintation!

    Thanks for all the comments. I enjoy my freedoms and wish to talk and tell stories to others.

    In the world of modeling, there is the fairly new Direct Demand Control. This allows many locomotives on the same track with the SAME electrical block! I have G,O,HO, and N scales. A friend of mine is adding DCC and sound to his N scale locomotives. Can you believe that? I got my electronic start in model railroading. Then went to CB and into Ham Radio. The circle has been complete for 10 years now, I'm back into model railroading.

    I am on Facebook. Eric Cartman is my hero!

    73,
    Andy KF4JQD

  8. #8
    "Island Bartender" KG4CGC's Avatar
    Join Date
    Mar 2007
    Location
    EM84ru, Easley SC
    Posts
    51,313

    Re: Thanks for the invintation!

    Welcome to The Island, Andy.
    Make your way on down to the bar at the end of the pier and grab a deck chair and a line. The mahi are biting and the breezes are warm.


  9. #9
    Administrator N8YX's Avatar
    Join Date
    Feb 2007
    Location
    Out in the sticks
    Posts
    26,087

    Re: Thanks for the invintation!

    I used to scratch-build my own rolling stock and structures in HO gauge. Had a German friend/CB crony/retired engineer local to my area who was an absolute master with a miniature lathe and milling machine. Built all his own steam locomotives and freight consist, but never did do the 'layout' bit. I wonder what happened to all of his stuff.
    "Everyone wants to be an AM Gangsta until it's time to start doing AM Gangsta shit."

  10. #10
    Orca Whisperer W3WN's Avatar
    Join Date
    Dec 2007
    Location
    Castle Shannon, PA
    Posts
    19,361

    Re: Thanks for the invintation!

    Welcome, Andy!
    --------------------
    I dabbled a little with O and HO trains when I was younger, and into my teenage years. Two things killed my interest off... the first was when the family moved from NJ to PA, and I lost my layout, had no space for a new one, an a few boxes got lost in transit (and the insurance didn't pay off, which is a 'whole 'nother story)

    The second was that my younger brother got involved with a hobby shop, and somehow all of MY rolling stock disappeared. So did his, for that matter. I don't know what the full story was, but when I finally got fed up about it (as my last engine vanished), he'd gotten kicked out of the store for good and they were claiming he owed them. I don't know if he got snookered or what, but I paid the price for it.

    Oh, there was a third reason as well. New home was up the street from a tourist steam RR, got involved with that for awhile. Playing with the real thing (even if I did just stand in the tender and shovel coal down to the engineer & fireman) was a lot more fun than models!

    73
    “Nobody is going to feel sorry for us. 90% of the people don’t care, the other 10% are glad it happened.” — Clint Hurdle, 2019

    BAN THE DH!

    Fudd's First Law of Opposition: If you push something hard enough, it WILL fall down.
    Teslacle's Deviant to Fudd's Law: It goes in, it must go out.

    Just remember: Abraham Lincoln didn't die in vain. He died in Washington, DC

    Cutch 300!!!!!

    “Nero fiddled while Rome burned. Trump golfed.” — Bernie Sanders

    Quando Omni Flunkus Moritati


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •