It's not open....
But it's semi-functional.
Been sitting here listening to a couple of stations east and west coast. Love it when the bands crack open when they *shouldn't*
Fun fun!
Printable View
It's not open....
But it's semi-functional.
Been sitting here listening to a couple of stations east and west coast. Love it when the bands crack open when they *shouldn't*
Fun fun!
I will, often schedule a 10m opening for the holiday. I forgot all about it this year. One of the frequency maters must have tried to schedule one in my place.
I'm about to start the teardown of the middle operating position and swap the FT-301 ensemble for an FT-901DM plus peripherals. That's the spot where I do the majority of my 10M work. Hopefully it'll still be hopping when all is said and done.
just some sporadic E here in the morning, and some aurora heard, nothing else.
11 is blasting. 10 is dead. Threw my call out on a couple of spots. Crickets.
Yea... you're right.Quote:
Originally Posted by KG4CGC
I'm listening to 11 now... what a mess. This is bad even by 1970s CB standards.
One of the stations is 500 hz off center on am... wow.
Probably intentional.Quote:
Originally Posted by KD8TUT
.
Yea... someone with that advanced a vocabulary probably would do something like that intentionally...Quote:
Originally Posted by koØm
<smirk>
How the F do they even talk when they are keying over each other like animals?
Man.. I thought CB was bad in the 70s.
It's called playing "radio".Quote:
Originally Posted by KD8TUT
When you are a "Superbowl" Operator and there are multiple stations keying down trying to be heard, it is wise sometimes to slide 'off the channel' to one side or another to be heard; the "mud ducks" are slobbering in their microphones on the channel while you and the person you are communicating with are are uninterrupted a few KHz off.
That's a real problem for "Channelized Hams", if your signal isn't on X.000 or, X.500 hertz, they cry about your radio is "Off Frequency"; No, my transmitter is on what frequency it is on and your receiver isn't. A symptom of your radio's receiver frequency being tied to your transmitter frequency.
.
Well I don't do a lot of 6 meters. So channelization is foreign to me except for being a kid on CB.Quote:
Originally Posted by koØm
The "Delta Tune" was locked on the CB when you were a kid, do a little hocus-pocus and your radio could slide between channels. You were a "kid" back during the 70's CB Craze?Quote:
Originally Posted by KD8TUT
I've got compression trimmer capacitors in operational equipment older than you :cool:.
Yup. I was a kid during that.Quote:
Originally Posted by koØm
"Once upon a time, long-long ago, when people wore pajamas and lived life slow...."Quote:
Originally Posted by KD8TUT
Transmitters and receiver were separate and discrete items, "friends" knew the game; I set my transmitter 1 KHz above the frequency, you set your transmitter 1 KHz below the channel, you tune your receiver to where you know I am and, I do the same with my receiver, tuning to where you are transmitting.
Generally speaking, all modern radios (transceivers) are channelized, your SSB signals are going to be x.xxx kilo-cycles above or below the AM carrier frequency.
For instance, in the old daze, the Liberty Band was at the lower side band 3.950 MHz so, you had to tune your receiver down to where you found the lower side band of the transmitting station.
It's almost 2020 and, I still have friends stuck in the CB 1970's with the transistor amps, Big AC shoot-out trucks and 6 element beams in their yard. You will find them on 27.025 MHz praying for sporadic E propagation.
.
I moved on from it by 1980. But remained SWL until I was licensed.Quote:
Originally Posted by koØm
At least back in the day I knew enough to not overdrive a cheap 5 watt transmitter.
No Excuses.
And..."Keep the rope tight!"
Propagation has returned. But it doesn't appear that anyone's playing on 10M. Maybe our nightly net will encourage some activity.