N8YX
05-02-2020, 09:47 AM
Anyone with development experience, please step inside... :icon_smile:
I have a memory unit for an NRD-515. JRC made two different versions - one a 24ch and another a 96 - with the only difference between them being the bank selector (or the lack thereof). An NDH-515 has 1 bank of 24ch whereas the NDH-518 has 4 banks of 24ch. A push button selects the active bank.
PE1ABR has details of a modification to the NDH-515 which will allow 8 banks of 24ch to be selected. A rotary switch and diode matrix/pull-up resistor array is used to provide a 3-line BCD-coded output which provides for bank-select logic. This requires drilling the unit's front panel then labeling the bank numbers. If I'm going to do this I'd rather fabricate and paint a new front panel. And...since the existing channel readout is digital, I thought "Why not use a PIC, Arduino or BASIC Stamp to expand on the concept and have a digital bank indicator as well?" Doing a little digging, I found a motorcycle gear-counter circuit that uses a 16F628. The assembly code was provided. It has up-down inputs on Port A and uses Port B to drive a single 7 segment display.
Perfect. Though my assembly skills are rusty as hell. Modifying this is going to be an exercise.
What's a good, robust IDE for this family of PICs? I looked at MPLABX, and I don't need to buy their Pro compiler as I don't have a need for speed - so the freeware version should work fine. This thing is very simple in concept: Upon power-up and no previously active bank having been selected, default to Bank 0. Pull the three Port A output lines Low, then send a "0" character (defined in an array) out the Port B lines. Loop and look for a switch press (switches connected to two of the other Port A lines for up/down incrementing). Process the switch press accordingly, output the BCD control data on the Port A lines and digit display character data on Port B's lines...then wait for a period and see if no other switch press has occurred. If not in say, 2 minutes then write the Bank Number to a data location in the device's EEPROM. On subsequent loops, compare the existing bank number with the stored bank number; update if changed and keep looping if not.
Upon subsequent power-ups, look for an existing Bank Number in EEPROM. If present, output the associated control/display data then loop and look for changes as above.
I'd really like to simulate this before actually programming a physical device...and I'd like to write the code in C if possible. Suggestions, thoughts, ready-made code examples?
I have a memory unit for an NRD-515. JRC made two different versions - one a 24ch and another a 96 - with the only difference between them being the bank selector (or the lack thereof). An NDH-515 has 1 bank of 24ch whereas the NDH-518 has 4 banks of 24ch. A push button selects the active bank.
PE1ABR has details of a modification to the NDH-515 which will allow 8 banks of 24ch to be selected. A rotary switch and diode matrix/pull-up resistor array is used to provide a 3-line BCD-coded output which provides for bank-select logic. This requires drilling the unit's front panel then labeling the bank numbers. If I'm going to do this I'd rather fabricate and paint a new front panel. And...since the existing channel readout is digital, I thought "Why not use a PIC, Arduino or BASIC Stamp to expand on the concept and have a digital bank indicator as well?" Doing a little digging, I found a motorcycle gear-counter circuit that uses a 16F628. The assembly code was provided. It has up-down inputs on Port A and uses Port B to drive a single 7 segment display.
Perfect. Though my assembly skills are rusty as hell. Modifying this is going to be an exercise.
What's a good, robust IDE for this family of PICs? I looked at MPLABX, and I don't need to buy their Pro compiler as I don't have a need for speed - so the freeware version should work fine. This thing is very simple in concept: Upon power-up and no previously active bank having been selected, default to Bank 0. Pull the three Port A output lines Low, then send a "0" character (defined in an array) out the Port B lines. Loop and look for a switch press (switches connected to two of the other Port A lines for up/down incrementing). Process the switch press accordingly, output the BCD control data on the Port A lines and digit display character data on Port B's lines...then wait for a period and see if no other switch press has occurred. If not in say, 2 minutes then write the Bank Number to a data location in the device's EEPROM. On subsequent loops, compare the existing bank number with the stored bank number; update if changed and keep looping if not.
Upon subsequent power-ups, look for an existing Bank Number in EEPROM. If present, output the associated control/display data then loop and look for changes as above.
I'd really like to simulate this before actually programming a physical device...and I'd like to write the code in C if possible. Suggestions, thoughts, ready-made code examples?