PDA

View Full Version : Wanted - Heathkit paddle knobs



N8YX
03-28-2015, 11:44 AM
Check your junk boxes and local hamfests for the following Heathkit parts. I'm especially interested in the set-screw version of these knobs (shown on right) but will take either. They're dark green in color and were used on the HW100/HW-101, SB100/101/102, SB30x/40x and SB614/634 equipment lines.

Not to be confused with the Yaesu version of such, which is made of black plastic, has a white indicator line on the paddle and uses a 6mm ID brass insert (rather than Heathkit's 1/4" aluminum insert).

Finder's and aggravation fees gladly paid.

13797

wa6mhz
03-28-2015, 01:13 PM
They are on Ebay very frequently, but expect to pay $10 or more each for them.

N8YX
03-28-2015, 01:43 PM
They are on Ebay very frequently, but expect to pay $10 or more each for them.
I've been getting the flatted shaft version quite often from that site but need some of the others to use with the ganged switch/potentiometer combos. This to make my '104 hacks work, as there's only so many holes in those chassis...have to double up on the controls.

Maybe Dayton. One hopes.