PDA

View Full Version : Skeleton Sleeve Antenna WORKS!!



AC2Q
11-19-2012, 10:07 AM
A recent QST had an article titled "6+2=1" detailing a 6m/2m antenna.

Driven element is made from a short section of 450 ohm ladder line, common coax feed.

I have a Ten Tec 6n2, so it was a perfect project.

I built it, it works as advertised, just letting members know.

AC2Q

K7SGJ
11-19-2012, 11:05 AM
Glad to hear it worked for you. I'd didn't think it had a ghost of a chance to work.

AC2Q
11-19-2012, 01:18 PM
Glad to hear it worked for you. I'd didn't think it had a ghost of a chance to work.

You have to approach the construction with the right Spirit.

NQ6U
11-19-2012, 01:39 PM
And you can't be even a Shade off in your measurements.

AC2Q
11-19-2012, 02:28 PM
And you can't be even a Shade off in your measurements.

Using Horizontal Poltergeistazion

NQ6U
11-19-2012, 03:08 PM
If you screw up, you'll be Boned for sure.

K7SGJ
11-19-2012, 03:14 PM
You need not be so cryptic, and be sure to keep the dust off of it, otherwise you'll be coffin all damned day.

NQ6U
11-19-2012, 03:18 PM
Yeah, you don't want to get the Joint dusty. It wouldn't be Humerus.

K7SGJ
11-19-2012, 03:22 PM
No it wouldn't. In fact that would really spook me.

AC2Q
11-19-2012, 05:31 PM
I got nuthin..............

N8YX
11-20-2012, 06:16 AM
I got nuthin..............

Unfortunately, "they'll be here all week" (badabump!). :snicker:

N2CHX
11-20-2012, 06:33 AM
:rofl:

X-Rated
11-30-2012, 11:09 AM
A lot of people install dipoles in their attic. Will these work installed in the closet?

EDIT: (You know. With the other sleeves?)