PDA

View Full Version : 10 Meter Dipole question!



KK4ICV
06-19-2012, 05:36 PM
I have a radio shack HTX-10 (25 watts). I made a inverted V. I recently purchased some #14 raw copper wire that I thought would radiate better than insulated wire to build another antenna out of. I live in a place where I cant have push poles or towers. I have my inverted V steathly hid about 20 feet off the ground run in between trees. Would I be better off to leave it an inverted V or go ahead and make my new one a horizontal dipole. I know that it changes the polarazation I was just wondering what would work better being that it is located in the trees? 73's KK4ICV

KG4CGC
06-19-2012, 05:45 PM
Forget uninsulated wire. Go to your local hardware mercantile supply and buy a 500' spool of 12ga THHN insulated wire. It is actually stronger and can withstand your punishment pulling and bending it around as well as UV and the weather. Your bare copper is going to eventually disintegrate. The radiation is the same from insulated wire as it is from bare.

Experiment with different configurations. You will find that some signals will come in better on a V, a vert, a horizontal, depending on the location of the station you are trying to hear and propagation.

ki4itv
06-19-2012, 05:59 PM
Just put it up and don't worry about the center support, a little swag in the center shouldn't harm much, and another ten or so feet in height might even be a better time investment.
Charles' (CGC) idea with the spool of wire to try different things is really the way to go. Try to get a color that blends into the background it stands against.

KK4ICV
06-19-2012, 06:31 PM
Would it matter if the wires on both sides of the center insulator wasnt completely in a straight line. I could get it up 15 or 20 more feet with a slight bend in it, as long as my wire wasnt touching anything. I guess we just cant grow straight trees anymore!

KG4CGC
06-19-2012, 06:35 PM
Would it matter if the wires on both sides of the center insulator wasnt completely in a straight line. I could get it up 15 or 20 more feet with a slight bend in it, as long as my wire wasnt touching anything. I guess we just cant grow straight trees anymore!

I use insulated wire and bend it over and around trees.

NQ6U
06-19-2012, 09:52 PM
Charles is right on all counts. Insulated wire may need to be cut a wee bit shorter than bare wire using the 468/f formula but other than that, it will work just fine. All my wire antennas are made with PVC insulated 14 gauge THHN from Home Depot and I've talked over most of the planet with them. And a dipole does not need to be straight. Bend them around as necessary.

KG4CGC
06-19-2012, 10:03 PM
Didn't know that about cutting the insulated wire shorter. Explains why my stuff tunes up better on the low end of the bands.

NQ6U
06-19-2012, 10:06 PM
Didn't know that about cutting the insulated wire shorter. Explains why my stuff tunes up better on the low end of the bands.

Yeah, kind of unexpected but the insulation actually slows the speed of propagation and makes the wire behave as if it were longer electrically.

KG4CGC
06-19-2012, 10:11 PM
Yeah, kind of unexpected but the insulation actually slows the speed of propagation and makes the wire behave as if it were longer electrically.

What? Are you taking about velocity? Like how they measure various types of coax?
http://www.radio-electronics.com/info/antennas/coax/coax_velocity_factor.php

NQ6U
06-19-2012, 10:18 PM
What? Are you taking about velocity? Like how they measure various types of coax?
http://www.radio-electronics.com/info/antennas/coax/coax_velocity_factor.php

Yep, exactly.

KG4CGC
06-19-2012, 10:21 PM
How do you think gauge works into this? I like 12 or larger.

NQ6U
06-19-2012, 10:57 PM
How do you think gauge works into this? I like 12 or larger.

I don't think it matters much. 12 AWG is a bit stronger but it's also heavier and tends to sag more on long spans than 14 AWG. I went with 14 AWG THHN mainly because it was cheaper.

KG4CGC
06-19-2012, 11:49 PM
I used 8ga on the 160 but after a year decided that 160 wasn't my flavor. So I saved half of it for a tunable longwire and the other half I'm going to use to booger up something good!

WØTKX
06-20-2012, 09:39 AM
It does matter, more so at higher frequencies. Or in the case of a cage dipole.

WØTKX
06-20-2012, 09:41 AM
http://youtu.be/f77oTeZ6wqI


http://youtu.be/f77oTeZ6wqI

KG4CGC
06-20-2012, 09:41 AM
It does matter, more so at higher frequencies. Or in the case of a cage dipole.

CAN THIS BE DEMONSTRATED WITH FERAL POLYNOMIALS?

NQ6U
06-20-2012, 11:00 AM
CAN THIS BE DEMONSTRATED WITH FERAL POLYNOMIALS?

No, you have to capture and tame them first. Or just use domesticated polynomials, which are a type of parrot.

w2amr
06-20-2012, 12:30 PM
I like 12 or larger.That's what she said.:dance:

KG4CGC
06-20-2012, 12:32 PM
That's what she said.:dance:

BEWM!

N8YX
06-23-2012, 05:19 AM
That's what she said.:dance:

In the case of the amateur-op crowd, I think she was referring to centimeters.

KG4NEL
06-24-2012, 07:26 PM
With waistlines measured in meters.

N5RLR
07-08-2012, 01:29 AM
Insulation on wire adds capacitance, thus lowering the resonant frequency. Throw up a dipole as you can fit it, trim to match, and go for the gusto. :mrgreen:

KG4CGC
07-08-2012, 10:12 AM
I heard a faint remnant of an old Schlitz commercial.

NY3V
07-09-2012, 09:33 AM
I heard a faint remnant of an old Schlitz commercial.

Q. Why do girls carry Pabst beer to the beach?

A. So they don't get sand in their Schlitz.

kb2vxa
07-09-2012, 08:49 PM
Crappy joke but there is a connection. Pabst Blue Ribbon, as well as Schlitz and Old Style were owned by a California Charitable trust. The crumbling remains of the Pabst Blue Ribbon Brewery may be foretelling of this brand’s future, the landmark bottle along the Parkway in Irvington, N. J. is long gone. I can't say much about Schitz either, never liked either of them.